Ameriwood HOME 3799215COM Instructions De Montage page 11

STEP 4
Be sure your parts are
positioned as illustrated.
Position and insert locking bolts (6) of left rail (E) into edge holes of left panel (A) as shown.
Be sure both parts are positioned as shown. Place the hammer block on top of leg in each of the 3
locking bolt locations and give a firm strike to lock together. The locking bolt (6) will snap into the
locking sleeve (7).
IMPORTANT NOTICE: Once locked together, parts cannot be separated.
Note: A rubber mallet can be used in place of a hammer and hammer block.
ameriwoodhome.com
E
A
11
end view