power on and volume control
tUrning tHe POWer On/Off
1. To turn on this unit, touch any button on the unit's front panel when the unit is in Standby mode.
or,
Press power on the remote control.
2. To turn off this unit, touch the +# button on the unit's front panel for more than 3 seconds.
or,
Press power on the remote control again.
▪
The standby LED is on when AC Plug is connected to the wall outlet and the Power of the unit is off. The
standby LED is off when the power of the unit is on.
▪
The power of the unit automatically turns off if there is no input for 20 minutes.
aDjUSting tHe VOLUMe
DC 12V 2A
ONLY FOR SERVICE
AUX IN
ONLY FOR SERVICE
Use +, - buttons to adjust the volume. As you adjust the volume, the Input mode LED blinks.
The LED remains on in case you increase the volume when it has already been set to maximum, or decrease the
volume when it has already been set to minimum.
Touch the +/– button on the right side of the front panel.
or,
Press vol +/– on the remote control.
▪
The volume level increases or decreases when you press VOL +/–.
▪
You can also use the volume control of device connected using the Galaxy Dock or Bluetooth to control
the volume. However, your ability to control the volume using the volume controls of devices connected
using Bluetooth may be limited.
10
DC 12V 2A
ONLY FOR SERVICE
AUX IN
DC 12V 2A
ONLY FOR SERVICE
AUX IN
ONLY FOR SERVICE
All manuals and user guides at all-guides.com
or
or
FUNCTION
FUNCTION
MUTE
VOL
BASS
MUTE
VOL
BASS
FUNCTION
FUNCTION
MUTE
MUTE
VOL
BASS
VOL
BASS