Publicité
Liens rapides
Publicité
Manuels Connexes pour Kuat IBEX AIXMPF01
Sommaire des Matières pour Kuat IBEX AIXMPF01
- Page 1 IBEX ™ FRONT MOLLE ASSEMBLY ASSEMBLY VIDEO...
- Page 2 Parts Drilled Front Molle Slotted Front Molle (4) M8 x 16 Bolts (4) T-Nuts (12) M8 Oversized Washers (4) M8 Nuts (4) M8 x 25 Bolts 6mm Hex Key 13mm Wrench...
- Page 3 Front Molle Installation Secure Drilled and Slotted Front Molle together with (4) M8 x 25 Bolts, (8) M8 Oversized Washers, and (4) M8 Nuts. To aid in alignment, do not fully tighten...
- Page 4 Insert (1) M8 x 16 Bolt through (1) M8 Oversized Washer, through the right top bolt hole on the Front Molle, and thread into (1) T-Nut. Do not fully tighten.
- Page 5 Insert (1) M8 x 16 Bolt through (1) M8 Oversized Washer, through the left top bolt hole on the Front Molle, and thread into (1) T-Nut. Do not fully tighten.
- Page 6 Place (1) T-Nut into the right vertical IBEX™ bed rail T-Nut channel.
- Page 7 Place (1) T-Nut into the left vertical IBEX™ bed rail T-Nut channel.
- Page 8 Slide left and right T-Channel bolts of the assembled Front Molle into vertical T-Channels of the IBEX™ frames. If Front Molle is being installed on an existing IBEX , it may be necessary to loosen IBEX truck bed clamps and move the frame away from the truck cab for easier access.
- Page 9 Align the right Front Molle bottom with previously placed T-Nut and secure using (1) M8 x 16 Bolt and (1) M8 Washer. With bolt secured, tighten top and bottom bolts completely.
- Page 10 Align the left Front Molle bottom with previously placed T-Nut and secure using (1) M8 x 16 Bolt and (1) M8 Washer. With bolt secured, tighten top and bottom bolts completely.
- Page 11 Finally, with left and right side T-Channel bolts secured, fully tighten center M8 x 25 bolts on the Front Molle.
- Page 12 • Drive responsibly. If you have questions or problems, please contact Küat directly by calling toll free 1(877)822-KUAT, or by email: info@kuat.com ADVERTENCIAS • Siga las instrucciones para un montaje, instalación y uso adecuados. • Verifique periódicamente el apriete de todos los pernos y tornillos.
- Page 13 You can review our limited warranty on our website or call customer service at the number below if you have questions or need a repair, replacement, refund, or a copy of the limited warranty. www.kuat.com/warranty Questions or comments? Drop us an email or call us directly! kuat.com info@kuat.com...
- Page 14 1.877.822.5828 info@kuat.com kuat.com...