Publicité
Les langues disponibles
Les langues disponibles
Problem
Temperature
inside is too
warm
Temperature
inside is too
cold
Doors can't be
closed easily
Water drips on
the floor
The light is not
working
Possible cause & Solution
You may have left the doors open too
long or too frequently; or the doors are
kept open by some obstacle; or the
appliance is located with insufficient
clearance at the sides, back and top.
Increase the temperature by following the
"Display controls" chapter.
Check whether the top of the refrigerator
is tilted back by 10-15mm to allow the
doors to self close, or if something inside is
preventing the doors from closing.
The water pan(located at the rear bottom
of the cabinet)may not be properly
positioned to direct water into this pan, or
the water spout is blocked. You may need
to pull the refrigerator away from the wall
to check the pan and spout.
· The LED light may be damaged. Refer
to replace LED lights in cleaning and care
chapter.
· The control system has disabled the light
due to the door being kept open too long,
close and reopens the door to reactivate
the light.
-29-
Publicité
