JAPANNEXT JN-5X40 Manuel De L'utilisateur page 7

Note:
* Handle the panel with care. Be careful when working not to press the LCD surface from above
with your fingers or any other objects, as it may damage the panel.
1. Attach the stand base to the support column.
2. Attach the stand to the monitor body with the supplied screws.
3. Attach the red cover to the connection part and fix it by turning it clockwise.
4. Confirm that the stand is securely attached to the monitor body and slowly lift it up.
1
3
* Please be careful not to pinch your fingers when adjusting the height.
* Tilt adjustment is supported. When tilting the screen forward for use, please be careful not to let
the body fall.
1. Make sure that the power of the monitor and computer is turned OFF before connecting the cable.
2. Attach the cable (HDMI, DP, Type-C) that is compatible with the monitor to the monitor.
Attach the same cable to the computer.
3. Turn ON the power of the monitor and computer.
Warning: To work safely, always connect the ground wire before plugging in the power plug (Only if there is a
ground link).Also, when disconnecting the ground connection, always unplug the power plug from the outlet first.
Note: Do not connect multiple HDMI cables or USB memory sticks at the same time as this may cause
malfunctions. Please connect only one cable to one computer.
QUICK START GUIDE
Installation
2
4
Connecting to a Computer
5
7