Publicité
Les langues disponibles
Les langues disponibles
OPERATING THE FAN
To turn the fan on or off, use the knob on the back of the fan.
0 = Off
1 = Low Speed
2 = High Speed
Always switch the fan off and unplug it when it is not in use.
FAN POSITION:
The fan can be adjusted vertically by
moving the clip. It can also be adjusted
horizontally by loosening the clamp
screw, adjusting the horizontal angle
and then re-tightening the screw. See
the diagram to the right.
CARE, CLEANING, AND MAINTENANCE
1. Be sure the fan control is in the "0" or "OFF" position and that the fan is un-
plugged before cleaning.
2. Access the fan blade by loosening the screw and nut of the back grill, then pull the
fan off of its spindle for cleaning.
3. Clean the fan blade, front grill, and rear grill gently with a soft, moist cloth.
4. After the blade and grills are completely dry, place the blade back into the unit.
Ensure that the safety guard locking screw is re-fitted correctly and secure.
• DO NOT immerse the fan in water.
• Never allow water to enter the motor housing.
• DO NOT use harsh chemicals to clean the fan.
7
Publicité
