Impecca FANFAIR Guide De L'utilisateur page 6

INTRODUCTION
Congratulations on your purchase of this FanFair clip-on Fan!
FEATURES:
• Clip-on Installation
• Tilting Head
• Safety Fuse Plug
Please verify your box contains the following items:
1 2
Please remove all packaging materials from the product before using it.
GETTING STARTED
ASSEMBLY:
1. Remove the lock screw on the back of the fan
head by turning it counter-clockwise.
2. Slide the neck of the Fan Clip into the Fan Head so
that the screw holes for each part line up.
3. Insert the lock screw and tighten it again.
INSTALLATION:
This fan can clip onto table or desk edges for easy place-
ment. Decide on a suitable location for the fan, within
a comfortable distance of a power outlet. Make sure it
is out of children's reach. Make sure the fan is clipped
securely and is not in danger of falling onto people
or dangerous obstacles.
WARNING: Do not install the fan in a bathroom or
other environment with excessive moisture. This is a
potential shock hazard.
• 20 Watt Motor
• 5 Ft. Power Cord
3
4
6
1. Fan head and
clip/base
2. User's Guide
3. Warranty
(inside this User Guide)
4. Tech Support Card