KSIX OBLIVION BXTW08N Manuel De L'utilisateur page 2

Case USB-C charging port
3 x pairs of included earpads
Earphones LED indicators
The earphones LED indicator informs about the state of the connection, among other aspects:
Pairing
Connected
Power on
Power off
Charging
Turn on/off the earphones
The earphones turn on automatically when taken out of the charging case. To turn them off automatically,
place the earphones into the charging case. Once they are in the charging case, they will start to charge
automatically.
To turn them off manually, tap the left or right earphone for 6 seconds, you will then hear the word "Power
off".
Note: The earphones cannot be turned on manually.
How to pair the earphones
Take the earphones out of the charging chase to activate the pairing mode automatically.
Activate the Bluetooth on your device, search for KSIX OBLIVION on the available Bluetooth devices list
and select it. Once the connection has been successful, you will hear the word "Connected". Once the
earphones have been connected to a device, they will pair with it automatically when taken out of the
charging case.
Troubleshooting: If the earphones do not turn on automatically, it should be due to low battery. Please,
charge the earphones and the charging case. If only one earphone is working, it should be due to a
connection failure. Please, reset the earphones as instructed later in this manual.
A white light will flash quickly until the earphones are paired.
A white light will flash every 5 seconds.
The earphones cannot be turned on manually.
A white light will flash 3 times and no light will be shown
afterwards.
A fixed white light will show while charging.