Intended Use; Approvals And Certifications - Honeywell IN-S Série Mode D'emploi

Honeywell

1.1 Intended use


INFORMATION!
The manufacturer shall not be liable for damage caused by
improper or inappropriate use.

1.2 Approvals and certifications

CE marking / EU declaration of conformity
The manufacturer certifies conformity with the EU
declaration of conformity and by attaching the CE marking.
The pulse generator meets the statutory requirements of
the relevant EU guidelines.
Comprehensive
guidelines
certifications, is contained in the EU declaration of
conformity.
The EU declaration of conformity is included in the delivery
and is also available to download at www.docuthek.com.
ATEX/IECEx

DANGER!
The pulse generator is suitable for use in Zone 1 hazardous
areas and is approved with the following certification:
2G Ex ia IIC T4 Gb
2G Ex ib IIC T4 Gb
IECEx TUR 16.0032X (IECEx)
TÜV 16 ATEX 7729 X
10
information
and standards,
 See Chapter 9 for more approvals and Directives.
Approvals and Annex A – Standards and Norms
73024353c
on the
as well
TÜV Rheinland Industrieservice GmbH
Am Grauen Stein | 51105 Köln | Germany
TÜV Rheinland Industrieservice GmbH
(ATEX)
Am Grauen Stein | 51105 Köln | Germany
© Elster GmbH | All rights reserved. Subject to modification
applicable EU
as recognized