Zippity Manchester Instructions D'assemblage page 3

S T E P T W O
1
Pickets are identified 1, 2, 3, 4 and 5 to create scallop pattern. Please
insert in pattern as identified in illustration. Starting with the
tallest picket, slide each one down thru the top rail and into the
bottom rail.
Note: The tabs on the bottom of the pickets are intended to go
into the bottom rail to lock picket into place.
1
Note: Once inserted, the
pickets will lock into place.
To remove the picket(s),
gently insert a butter knife
along the picket direction
as shown and slowly pull up
the picket(s).
3
M a n c h e s t e r Vi n y l P i c k e t F e n c e I n s t r u c t i o n s