Zippity Manchester Instructions D'assemblage page 2

S T E P O N E
1
1
Position the top & bottom rails as illustrated and slide the two
posts down thru the large routed holes in the top and bottom
rails until the predrilled holes in both rails are aligned with the
pre-drilled holes in both posts.
Note the difference between the top and bottom rails.
Tip!
Shine an LED light from smart phone or flashlight down the
end of the posts to help identify alignment of pre-drilled
holes if necessary.
Note: Underside of Bottom Rail is blank
compared to the Top Rail with
holes for pickets on both sides.
Note: Orientate the bottom of Posts as Illustrated
2
Secure the rails to the post with screws on both sides of the
rails as illustrated.
2
Note: Align Holes
2
M a n c h e s t e r Vi n y l P i c k e t F e n c e I n s t r u c t i o n s