Holex 421492 Mode D'emploi page 20

HOLEX Digital outside micrometer
de
1. General information
Read and observe the operating instructions, keep them as a reference for later and ensure they are accessible at
bg
all times.
1.1. SYMBOLS AND MEANS OF REPRESENTATION
da
Warning symbols
CAUTION
en
2. Safety
fi 2.1. GROUPED SAFETY MESSAGES
CAUTION
fr Leaking electrolyte
Eyes and skin irritation can occur due to leaking, poisonous and corrosive electrolytes.
▶ Avoid contact with your eyes and body.
▶ In the event of contact, rinse out the affected area immediately with plenty of water and consult a doctor.
it
2.2. INTENDED USE
 Outside micrometer for digital and analogue reading.
hr
 For both industrial and private use.
 Use only in accordance with the technical data.
 Use only when it is technically in good condition and safe to operate.
lt
2.3. REASONABLY FORESEEABLE MISUSE
 Avoid vibrations, jerky movements, shocks and impacts.
nl
 Do not use in potentially explosive atmospheres.
 Do not expose to strong magnetic fields or high voltage environments.
 Do not expose to strong heat, direct sunlight or open fire.
no
 Only open the casing at the battery cover for replacing the battery.
 Do not carry out any unauthorised modifications.
3. Transport
pl
Transport in the original packaging at temperatures between -10 °C and +60 °C. Secure against falling to the ground.
4. Device overview
pt
4.1. OUTSIDE MICROMETER
A
ro
1 Hanger 2 Anvil 3 Measuring spindle 4 Clamping lever 5 Button"ON/OFF - SET" 6 Button"ABS/INC - UNIT" 7 Scale
sleeve 8 Scale drum 9 Friction ratchet 10 Quick adjustment 11 Battery cover (back side) 12 Adjustment hole (back side) 13
LCD-Display 14 Insulating plate 15 Adjustment tool
sv
4.2. DISPLAY
B
sk
Digital display:
1 Low battery voltage 2 Measuring mode "Absolute" 3 Measuring mode "Incremental" 4 Zero point adjustment 5 Di-
gital measured value 6 Display measuring unit
sl
Analogue display:
7 0.01 mm - scale on scale drum 8 Scale for full millimetres on scale sleeve 9 Bezugslinie 10 Skala für halbe Millimeter auf
es
Skalenhülse 11 Reading edge
4.3. SCOPE OF SUPPLY
 1x micrometer
cs
 1x plug-in ball for measuring curved surfaces
 For measuring range from 25 mm: 1x setting dimension
 1x adjustment tool
hu
20
Meaning
Indicates a hazard which if not avoided may lead to minor or moderate injury.
Lorem i