Connection to the TV
•
Make one of the following connections, depending on the capabilities of your existing device.
AUDIO CONNECTION
TV
standard audio
audio cable
this unit
AUDIO OUT
*
1
This unit is compatible with the progressive scan system. The feature provides you with the higher quality pictures
than traditional output system does. To utilize this feature, a component or an HDMI connection is required. Refer
to "HDMI Video Resolution" or "Component Output" setting on page 34 to set the video resolution.
2
*
Analog audio connection is not required for this connection.
Supplied cables used in this connection are as follows:
•
RCA audio cable (L/R) x 1
•
RCA video cable x 1
•
HDMI cable (High Speed HDMI Cable) x 1
Please purchase the rest of the necessary cables at your local store.
Note
•
Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be
distorted due to the copy-protection system.
•
If the picture is not output properly to the TV because of "HDMI Video Resolution" or "Component Output" setting,
press and hold [ B PLAY] on the front panel for more than 5 seconds. "HDMI Video Resolution" and "Component
Output" setting will be reset to the default automatically. You cannot change the video resolution during Blu-ray
Disc playback. To change the resolution, stop playback.
•
A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) jack allows
digital transfer of both digital video signals and multi-channel audio signals.
12
CONNECTIONS
Method 1
standard picture
AUDIO IN
VIDEO
R
L
IN
RCA
video
cable
RCA
and
VIDEO
OUT
VIDEO OUT
VIDEO CONNECTION
Method 2 *
1
Method 3 *
better picture
best picture
COMPONENT
VIDEO IN
Y
(Green)
P
/C
B
B
(Blue)
P
/C
R
R
(Red)
HDMI-DVI
RCA
cable
component
or
or
video cable
(Green)
(Red)
COMPONENT
VIDEO OUT
Y
P
/C
R
R
(Blue)
P
/C
B
B
COMPONENT
VIDEO OUT
AUDIO / VIDEO
CONNECTION
1
Method 4
best audio / picture
DVI IN
HDMI IN
HDMI
cable
or
HDMI OUT
*
1, 2
EN