Midland Wild Guardian Manuel D'utilisation page 7

What's in the box
1. Wild Guardian trail camera
2. USB-C cable for connection to PC
3. Joint
4. Fixing base mount
5. Fixing screws
6. Fastening strap
Notes on Installation
• Do not touch the lens with your fingers. Finger grease
may be left on the lens and will result in unclear videos or
snapshots. Clean the lens regularly.
• Make sure that the installation position is not hindered by
trees or leaves.
| 10 |
6
1
3
2
4
5
Wild Guardian instruction guide
Description of the controls
1. PIR sensor: movement detection sensor.
2. Light/brightness sensor: day/night sensor.
3. Microphone
4. Lens
5. Infrared led
6. Loop for fastening strap
7. Hook/unhook lever with safety hook for an optional padlock.
8. Universal screw mount
9. ON/OFF/SETUP: Move the selector to turn on/off the camera. In
SETUP mode you will access the Settings menu.
10. USB-C port: suitable for the connection to PC or recharge.
11. Speaker
12. AV port: audio/video exit (cable not supplied).
13. Plug for external power supply: to power the device from an exter-
nal source (cable not supplied).
Wild Guardian instruction guide
5
4
3
2
1
13
6
8
7
9
12
11
10
| 11 |