ENGLISH
Position the middle hinge on the left of the freezer door and insert the gun of hinge
3.
in the hole of the door then fix it firmly.
Remove the door stop of the refrigerating door and put it to the opposite side.
4.
Align the lower hole of the door to the gun of the left middle hinge while taking
care of the alignment of the door compared to the refrigerator.
left door stop
Insert the gun of the upper hinge in the upper hole of the door then fix it firmly.
5.
Screw the cover back to the top of fridge.
6.
GB-16
MAINTENANCE
FRIDGE DEFROSTING
The fridge defrosting process is carried out automatically every time the compressor
stops.
The defrost water is automatically routed to the drain port and into a tray placed on
the top of the compressor to the rear of the appliance from which it evaporates.
Make sure the drain port on the fridge at the rear of the appliance is kept clear.
FREEZER DEFROSTING
Frost will accumulate inside the freezer depending upon the length of time during
which the door is left open or the amount of moisture introduced.
It is essential to ensure that no frost or ice is allowed to form at places where it will
affect the close fitting of the door seal.
This might allow air to penetrate the cabinet, thus encouraging continuous running
of the compressor.
Thin frost formation is quite soft and can be removed with a brush or plastic scraper.
Do not use metal or sharp scrapers, mechanical devices or other means to accelerate
the defrosting process. Remove all dislodged frost from the cabinet floor.
For the removal of thin frost it is not necessary to switch off the appliance.
For the removal of heavy ice deposits disconnect the appliance from the mains supply
and empty the contents into cardboard boxes and wrap in thick blankets or layers of
paper to keep them cold. Defrosting will be most effective if carried out when the
freezer is empty, and it should be carried out as quickly as possible.
An increase in temperature of frozen food packages during defrosting will shorten
the storage life. Provided that the contents are well wrapped and placed in a cool
area, they should keep for several hours.
Examine the contents when replacing them in the freezer and if some of the packages
have thawed out.
ENGLISH
GB-17