Télécharger Imprimer la page

Bauhaus GMTI 52 Gardol Manuel D'utilisation page 81

Outil de jardin multi-fonctions 5 en 1

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 89
• Cutting round trees
Walk round the tree from left to right, approaching the
trunks slowly so as not to strike the tree with the line and
keeping the cutting line head tilted forward slightly.
Remember that the nylon line could lop or damage small
shrubs and that the impact of the nylon line against the
trunk of bushes or tr
• Adjusting line length when working
This machine is fitted with a "Tap & Go" head.
To release more line, tap the cutting line head against
the round with the engine at top speed: the line will be
released automatically and the knife cut off the excess
length.
End of Operation
When you have finished your work:
- Switch off the engine as indicated above (Chap. 6).
- Wait for the cutting device to stop and fit the blade
guard.
Maintenance and Storage
Correct maintenance is essential to maintain the original
efficiency and safety of the machine over time.
WARNING! During maintenance operations:
- Remove the spark plug cap.
- Wait until the engine is sufficiently cold.
- Use protective gloves when handling the blades.
- Keep the blade protection device on, except when
intervening directly on the blade.
- Never dispose of oils, fuel or other polluting mate-
rials in unauthorised places.
ANGLE TRANSMISSION
GB-35

Publicité

loading

Produits Connexes pour Bauhaus GMTI 52 Gardol