Publicité
Les langues disponibles
Les langues disponibles
English
Included material:
1. 1x MSH-133-050-HQ
2. 4x D912 6x20
Note:
All fixing screws shall be tightened to the
torques specified in the table below.
Standard quality:
8.8
Recommended torque for screws and bolts
Tightening torque [Nm]
Diameter
Class 5.8
M2
0.22
M3
0.77
M4
1.8
M5
3.6
M6
6.1
M8
15
Fixing the tool holder on the machine
1. Insert the whirling head into the desired
position on the revolver. Block at first, the
2nd position with a planned synthetic cork.
2. Insert and tighten 4 screws of fixation (1) on
the revolver.
3
2
1
Zone industrielle C
Rte du Grammont 101
CH-1844 Villeneuve
Operating instructions
MSH-133-050-HQ
Tool holder
Screw M6x20
Class 8.8
Class 10.9
Class 12.9
0.35
0.49
0.58
1.2
1.7
2.1
2.9
4
4.9
5.7
8.1
9.7
9.8
14
17
24
33
40
PCM Precision Tooling SA
Copyright © PCM Precision Tooling
Mode d'emploi
Betriebsanleitung
Use
1. Measure the offset of the support and
define it in the machine.
2. Insert and tighten 4 screws of fixation (1)
on the revolver.
Example of the milling cutter indicating the slope of
3. Check the slope with a sensor and
tighten the 4 blocking screws (3).
SWISS MADE
SA.
Document :
Garant:
MSH-133-050-HQ
BT
Mode d'emploi.docx
Validation :
Page : 2 de 3
27.05.2024
3°02
Tél ++41 21 967 33 66
Fax ++41 21 960 38 95
http://www.pcm.ch
email: sales@pcm.ch
Publicité
