Publicité
Les langues disponibles
Les langues disponibles
OPERATION
DANGER:
the bar and chain jams on any electrical cord or line, DO NOT TOUCH THE BAR, CHAIN
OR THE ALUMINUM POLE! THEY CAN BECOME ELECTRICALLY LIVE AND MAY BE
VERY DANGEROUS. Continue to hold the pole saw by the insulated rear handle or lay
it down and away from you in a safe manner. Disconnect the electrical service to the
damaged line or cord before attempting to free the bar and chain from the line or cord.
Contact with the bar, chain, other conductive parts of the pole saw, or live electric cords
or lines will result in death by electrocution or seri ous injury.
WARNING:
Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown
into your eyes and other possible serious injuries.
WARNING:
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
Before each use, inspect the entire product for damaged, missing, or loose parts such
as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts are replaced.
APPLICATIONS
You may use this product for the purpose listed below:
◾
Limbing
◾
Pruning
FILLING OILTANK WITH BAR AND CHAIN LUBRICANT
WARNING:
injury; always remove the battery pack from the tool before filling the tank with oil.
16
POLE SAW ATTACHMENT — PSA1000/PSA1000-FC
Never cut near power lines, electric cords, or other electric sources. If
Do not allow familiarity with this product to make you careless.
Always wear safety goggles or safety glasses with side shield
Do not use any attachments or accessories not recommended by the
To prevent accidental starting that could cause serious personal
Publicité
