Publicité
Les langues disponibles
Les langues disponibles
Installation
1
Installing the faucet assembly
CAUTION: Always shut off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle
to relieve water pressure and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old faucet. Clean the mounting surface.
□
Unscrew the nut (C), and remove the washer (B).
1a
NOTE: This step is for ange installation (optional).
□
Before installation, ensure that the ange (E)
is placed on the bottom of the new faucet
assembly (A).
□
Insert the faucet assembly (A) through the hole
in the sink.
A
E
4
1b
NOTE:
This step is for escutcheon installation (optional).
If the sink is uneven, use silicone under the gasket (G).
□
Before installation, remove the ange (E).
□
Place the escutcheon (F) and the gasket (G) on
the bottom of the new faucet assembly (A).
□
Insert the faucet assembly (A) through the hole
in the escutcheon (F).
E
A
F
G
Publicité
