Cleaning And Maintenance - HAEGER SM-3CB.004B Mode D'emploi

•
Always hold the shaver at a right angle to the skin so that all
three heads are touching the skin with equal pressure.
•
The use of short, circular motions in stubborn areas may obtain a
closer shave, especially along the neck and chin line.
•
Do not press hard against the skin to avoid irritation and/or
damage to the rotary heads.
•
Recommend you use your new shaver daily for up to four weeks
to allow time for your hair and skin to become accustomed to the
new shaving system.

Cleaning and maintenance

Care for your appliance to ensure a long-lasting performance.
We recommend you clean your product after each use.
The easiest and most hygienic way to clean the appliance is by rinsing
the appliance head after use with warm water.
Keep the switch in the "off" position when not in use.
1. Push the switch of shaver to position off to turn off the shaver
and cut off the power cord.
2. With the foils assembly in place, apply some liquid soap into
the foils assembly. (Fig.7).
3. Turn the shaver on and pour some water over the outer foil
(Fig.8).
4. After about 30 seconds, turn the shaver off, remove the foils
assembly and clean it with running water and let it dry
completely (Fig.9).
5. Wipe off any moisture from the shaver with a dry cloth.
Cleaning Trimmer
•
Lubricate the teeth of the trimmer every six months with a drop
of sewing machine oil.
User Instructions
English
5