Publicité
Les langues disponibles
Les langues disponibles
Page 2
Section 1. Important Safety Instructions ........ 3
Section 2. Cleaner Specifications ................... 4
Section 3. Assembly and Setup ...................... 4
3.1
Unpacking .......................................................... 4
3.2
Assembling the Transport Caddy ....................... 4
3.3
Connecting the Control Unit to the Caddy .......... 6
3.4
Connecting to a Power Source ........................... 6
Section 4. Operation ......................................... 7
4.1
The Polaris P825 Cleaner Control Unit .............. 8
4.2
Submerging the Cleaner .................................... 8
4.3
Starting the Cleaner ........................................... 9
4.4
Wall Cleaning (Surface Control System
4.5
Stopping the Cleaner
and Removing from the Pool ............................ 10
4.6
Rinsing the Cleaner .......................................... 10
4.7
Cleaning the Filter Canister .............................. 10
4.8
Storing the Cleaner ..........................................11
THANK YOU FOR PURCHASING THE POLARIS CLEANER.
YOUR POLARIS ROBOTIC CLEANER HAS BEEN DESIGNED AND MANUFACTURED TO BE EASILY INSTALLED
AND TO PROVIDE LOW MAINTENANCE OPERATION. PRIOR TO INSTALLING YOUR NEW POLARIS CLEANER,
PLEASE DO THE FOLLOWING:
1)
Complete and return the warranty registration card.
2)
Record your purchase information on the spaces provided below.
3)
Attach your invoice (or a copy) to this page.
Taking these steps will help ensure prompt warranty service, should it be required. If service is required, please
contact your original dealer. If the original dealer does not perform warranty service, please visit
www.polarispool.com to locate an independent service company near you. If you are unable to locate a service
company, please call our Technical Support department at 1-800-822-7933.
RECORD YOUR POLARIS CLEANER DATA HERE:
Date of Purchase
City
Table of Contents
™
) .......... 9
Purchased From
State/Province
Section 5. Maintenance .................................. 12
5.1
Cord Tangling ................................................... 12
5.2
Replacing the Brushes ..................................... 13
5.3
Replacing the Tracks ........................................ 14
Section 6. Replacement Parts ....................... 14
Section 7. Troubleshooting ........................... 15
7.1
Using the Cleaner Error Indicator ..................... 15
7.2
General Troubleshooting .................................. 16
Serial Number:
(located on machine head)
Zip/Postal Code
Publicité
