Coleman 5461 Serie Notice D'emploi page 6

Standard Ignition Stove
Set on sturdy,
flat surface. For
outdoor use only.
Hold lighted
match near
burner and
open burner
valve. (Fig. 11
and Fig. 12)
INSTASTART™
Electronic Ignition Stove
Set on sturdy,
flat surface. For
outdoor
use only.
Open burner
valve and
repeatedly
push igniter
button until
burner
lights.
(Fig. 13 and
Fig. 14)
NOTE: If igniter
fails to light
stove, use
match to light
burner. If the
stove is wet the igniter may not spark.
Adjust flame
with burner
valve.
(Fig. 15)
Flame
should be
blue with
a hint of
yellow
on tips.
To Turn Off
Close both
burner
valves firmly.
(Fig. 16)
To Clean
Make sure stove and griddle (if equipped)
are cool. Move stove away from flame
(including pilot lights) and other
ignition sources.
Remove propane cylinder from
regulator and replace protective cap
Fig. 11
on cylinder. (Fig. 17)
Remove regulator from stove. (Fig. 18)
Fig. 12
Lift off
griddle and
pot support.
(Fig. 19 and
Fig. 20)
NOTE: The
griddle is
optional.
Fig. 13
Fig. 14
MAINTENANCE, EACH USE
• Keep stove area clear and free from
combustible materials, gasoline and
other flammable vapors and liquids.
• Do not obstruct the flow of
combustion and ventilation air.
• A good flame should be blue with
minimal yellow tip. Some yellow tips
on flames are acceptable as long as
Fig. 15
no carbon or soot deposits appear.
• Wipe stove and stove griddle (if
equipped) clean with a soft cloth
and mild dish detergent. Do not use
abrasives. (Fig. 21)
Fig. 16
English - 5
Fig. 17 Fig. 18
Fig. 19
Fig. 20
Fig. 21