Publicité
Les langues disponibles
Les langues disponibles
Installation
NOTE: Do not completely tighten bolts until indicated
in assembly step.
1
Attaching the chair seat and back
to the chair base
Attach the seat and back (A) to the chair frame (B) using a
■
1/4 * 2-1/2 in.
bolt (AA) through a
through the chair frame (B) and the seat and back (A), through
a
1/4 in.
Metal Washer (CC) and secure with a 1/4 in. Nut (EE).
Repeat procedure for the other side.
B
A
2
Attaching the chair seat and back
to the chair base
Insert a
5/16 * 1-1/2 in. Bolt
■
washer (FF) and a
5/16 in.
and back (A) and secure into the chair frame (B). Repeat
procedure for the other side.
A
B
Securely tighten all bolts and nuts.
Care and Maintenance
Though its powder-coated nish is rust-resistant, steel is prone to rust over time with exposure to the elements. In case of rust or scratches,
lightly sand the affected area and apply touch-up paint. To maintain the nish periodically apply wax with a soft cloth.
Wash frames with a mild solution of soap and water; rinse thoroughly. Do not use bleach or solvents.
Always use an umbrella base to secure umbrella. Do not store anything on glass tabletop. Ensure the "o" ring is in place
in the umbrella hole in the glass top before inserting umbrella. Make sure umbrella is in the closedposition when not in
use and during high winds. Use furniture covers or store indoors during cold or inclement weather.
1/4 in.
Metal Washer (CC),
A
EE
CC
AA
CC
(BB) through a 5/16 in. lock
Metal Washer (DD), through the seat
FF DD
BB
A
B
3
Turning the chair upright
Turn the chair upright. Repeat procedure for other ve chairs.
■
Your chairs are now ready for use.
B
4
Publicité
