Publicité
Les langues disponibles
Les langues disponibles
- Try to reduce the exposure to vibrations by, for instance, wearing gloves and by
taking regular breaks.
Brushes
- Do not fit brushes on machines that run faster than the maximum brush speed.
- Do not use damaged brushes.
- Discoloring as a result of rust, or other signs of chemical or mechanical
modification of the brush material, can cause the brush to wear out in advance.
- Store brushes in a suitable place, protected from the following:
• High relative humidity, heat, water and other liquids that can damage the brush.
• Acid of vapour from acid.
• Low temperatures that can result in condensation on the brush.
• Deformation of part of the brush
Description and assembly
1.
On/off switch
2.
Handle
3.
Battery holder
4.
Brush protective cap
5.
Brush
6.
Button for adjust the brush-head
angle
7.
Screw for securing telescopic rod
8.
Telescope rod
9.
Button adjustable handle
10. Adjustable handle
11. Battery charger
12. Battery
Do not use the machine before it is
completely assembled, as in the
picture !
Assembly of protective cap and brush
-
Secure the protective cap with the 3 screws to the brush head (see image A)
-
Press on the axle lock (see image B). The axle is now locked and cannot turn.
43
Publicité
