Home Decorators Collection 68-WWD Guide D'utilisation Et D'entretien page 14

Operating Your Fan and Remote Control
4. Timer
□
Pressing the timer button will automatically turn the fan and light (if light is on) off after 2, 4, or 8 hours. When you activate the timer mode,
the LED to the left of the time above the clock will illuminate.
Off 2H
5. Light
□
Press and release the light button to turn the light on or off.
□
Light on: The fan memory function will resume the light setting (on or off and dim) on the fan prior to the power being turned off.
□
Press and hold the button to activate the dimmer function.
6. Correlated Color Temperature (CCT) changing
Push and release the button to cycle through the three color temperature options.
□
Option 1: 2700K (Soft White).
□
Option 2: 3000K (Warm White).
□
Option 3: 5000K (Daylight).
7. Fan reverse button (Must be pushed when the fan is in operation)
□
Warm weather: LED bar will illuminate and the lights will flow from high to low.
□
Cool weather: LED bar will illuminate and the lights will flow from low to high.
A. Warm weather - (Forward) A downward airflow creates a cooling
effect. This allows you to set your air conditioner on a higher setting
without affecting your comfort.
B. Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
NOTE: Do not wait for the fan to stop before pressing the reverse button.
The fan will not reverse direction if the fan is not moving.
4H 8H
14
Disables timer
A. Warm weather
B. Cool weather