Publicité
Les langues disponibles
Les langues disponibles
Camshaft Sprocket and Ribbed Drive Puller
FEATURES...........................
for removing pulleys and camshaft sprockets
•
•
for easy and precise adjustment the pulling arms
are interconnected by adjusting disc
stepless range of pulling arms: 42 to 82 mm
•
•
suitable for material thickness of max. 10 mm
pulling depth: 27 mm
•
gross weight: 1030 g
•
CONTENT......
3 pulling arms, Ø 12 mm, M10x1.5
•
•
puller body with 6 grooves and adjusting disc
spindle M14x1.5, 19 mm hexagon, with centering ball
•
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-compliance
of the safety instructions may lead to damage, personal injury and to termination of the warranty. Keep
these instructions in a safe and dry location for future reference. Enclose the operating instructions when
handing over the product to third parties.
SAFETY INFORMATIONS
•
Keep children and other persons away from the working area.
Do not allow children to play with this tool or its packaging.
•
•
Do not use the tool if parts are missing or damaged.
Use the tool for the intended purpose only.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
•
accidentally.
This manual serves as a brief guide and does not replace a workshop manual. Always refer to the
•
vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
USE
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycling centre and disposed of in a manner which is
compatible with the environment. Contact your local solid waste authority for recycling
information. Dispose of this product at the end of its working life environmentally.
.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
......
................................
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8964
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicité
