Publicité
Les langues disponibles
Les langues disponibles
Funny Bunny Care and Use
To change the batteries, open the battery compartment with a suitable screwdriver. Replace the
spent batteries with new batteries of the same type, making sure you match up the poles correctly.
Screw the battery compartment together again securely.
Safety instructions
•
Keep these instructions in a safe place; they contain important information!
•
Non-rechargeable batteries must not be recharged!
•
Rechargeable batteries may only be charged under adult supervision.
•
Different types of batteries or new and used batteries are not to be mixed!
•
Insert the batteries in the correct "+" and "-" positions.
•
Remove the batteries when they are empty or if the unit is not going to be used for a long period
of time.
•
The supply terminals must not to be short-circuited.
•
We recommend the use of alkaline batteries.
•
Only use batteries of the same or similar type.
•
Always replace all the batteries at the same time, not just singly.
Maintenance & Safety:
•
To clean, wipe down Funny Bunny's surface with a dry or lightly damp cloth. Do not use
chemical solvents.
•
Keep Funny Bunny and other game components out of direct sunlight and other sources of heat.
•
Keep Funny Bunny away from liquids.
•
Do not take Funny Bunny apart.
•
Turn Funny Bunny switch to the OFF setting after the game ends.
Troubleshooting:
•
Check to make sure Funny Bunny has been turned on.
•
Ensure that batteries are inserted correctly.
•
Insert fresh batteries.
•
Turn off Funny Bunny for 30 seconds.
•
Remove batteries and reinsert them after 5 minutes.
•
Funny Bunny turns off automatically after 30 minutes when not in use. In this instance, the
player must turn the switch to the OFF setting and then back to the ON setting.
Dispose of any items marked with this symbol as follows: Do not put any of the game's
electronic components in your household waste, but take them to the appropriate collection
point at your local waste disposal site. Please contact your council for further details.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Publicité
