Publicité
Les langues disponibles
Les langues disponibles
cont .. installation
NOTE:
1. Before installation, make sure to switch off the main switch.
2. The ceiling must be able to support a weight of atleast 120kg
and the thickness of the ceiling must be equal of greater than 30cm.
3. Rangehood should be position at a distance of 65-75cm for optimal
efficiency.
Measure the distance between the ceiling ang the floor.
1
(refer to the image on the right)
a - ceiling to floor distance =
b - cook top =
c - length of the rope =
Attach the screw cylinder to the hanging board
2
using 2 M10 screw nuts as shown below.
M10 screw nut
Mark the ceiling with (8) corresponding holes from
5
the hanging board. Then make holes using a drill.
1mm
Screw barrel
Hanging
board
(upside down)
36cm
a
Attach 4 adjustable screws to the hanging board.
3
Align the screw and do not over tighten.
Pass wire ropes through the adjustable screws.
4
and fix using clamping screw and nut.
Make sure to measure ropes according to length
on step 1.
1
Pass through the wire rope to the cover.
6
Match the hole for the power cord.
7
Secure the cover using the lock nut.
7
c
65-75cm
b
2
Publicité
