LEMAN FM230-L1 Manuel D'utilisation page 48

5. Put the hook of the vertical stand
upwards, align the two holes with
those on the filtration housing,
insert the screw and tighten. (Fig.
6)
6. Attach the bottom end of the bag
with the holder on the filtration
housing, hold the holder on the
hook, then fasten the strap. Attach
the lower bag on the bottom end
of the filtration housing and
fasten the strap. ( Fig. 7)
Then the machine has been finished assembly. A re-inspection is necessary to do to
check whether the bolts and screws are loosing. After the re-inspection, you can
connect the machine to a power source and have a trial run.
NOTE: The trial run should be done according to the Safety Rules.
- - 7
EN