Publicité
Les langues disponibles
Les langues disponibles
If the sludge left inside the dust tank and vacuum hose is not cleaned up, it will lead to the
reproduction of microorganisms and bacteria and give off odor.
13) The dust tank cover shall be covered according to the original installation method and installed
back on the main engine.
Please make sure that the lid of the dust tank is properly closed.
Load the dust bin into the main machine.
If the dust tank is not properly loaded, the suction strength will be reduced.
Please pour out the sewage before it exceeds the full water level. If it continues to be used after
the full water level, the automatic water absorption stop device will not continue to be used.
At the end of the product use, please remove the handle, vacuum hose and dust tank and let the
main engine run for 5-10 minutes to dry the inside of the main device:
14) Press down on the handle buckle and pull out the vacuum hose connector
MAINTENANCE
During the maintenance, please be sure to turn off the device, and pull out the power plug.
Do not water the machine, which may cause electric shock, injury or failure.
Do not use detergent, thinner, volatile oil, bleach, etc.
Do not use chemical rags.
14
Publicité
