Operation - Use - Bestron AHP112 Mode D'emploi

Plaque de cuisson unique
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
tHE EnVIronMEnt
Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin; hand it
in at a collection point for the reuse of electrical and electronic equipment. Please refer to the symbols
on the product, the user's instructions or the packaging.
The materials can be re-used as indicated. Your help in the re-use, recycling or other means of making
use of old electrical equipment will make an important contribution to the protection of the environment.
Contact your municipality for the address of the appropriate collection point in your neighbourhood.
oPErAtIon - General
The hotplate is only
intended for domestic use,
not for professional use.
1. Hotplate
1500W - Ø165mm
2. Pilot light
3. Adjustable thermostat
with on / off switch
4. Non-slip feet
oPErAtIon - using for the first time
1. Remove the appliance from the packaging.
2. Clean the appliance thoroughly to remove any manufacturing residues (see "Cleaning and maintenance").

oPErAtIon - use

1. Select a suitable position close to an electric socket, on a dry and even surface.
2. Make sure the control is in the "MIN" position before you plug in (turn entirely to the left).
3. Plug in.
4. Turn on the device by turning the control to the right. You can also use the control to adjust the
capacity.
5. Due to the cooking plate's construction, residual heat will remain after switching off. This may be used to
keep food warm for a short period.
The setting of the thermostat depends on the type of pan, the thickness of the pan, the food and your personal
preference.
Broadly, you can keep these settings, MIN = off, 1 = on / simmer, 3 = roast, 5 = Cooking
Make sure the diameter of the pan is similair to the diameter of the hotplate. Also make sure the
bottom of the pan is flat. This is to avoid wasting energy. And to prevent a defect caused by
disproportionate distribution of heat. Use the small hotplate for small pots and the large hotplate for large
cooking pots.
2.
20
Instruction manual
4.
Figure 1
Figure 2
1.
3.

Publicité

Table des Matières
loading

Table des Matières