Nordcap 437030013 Manuel D'installation Et Emploi page 24

DESCRIPTION OF CONTROLS VERS.E
In the items with separate drawers, the white arrows on the label will indicate which drawer is controlled by the board. Models with 3
separate drawers: the central drawer does not have any indication.
OPERATING METHODS
• Switch on the appliance by pressing key A.
Preheating
• Three dotted line will appear.
• To pre-heat, press key D and set the temperature to 90°C.
• Then press key B, START.
• The display will show always actual temperature chamber.
• Switch on the appliance by pressing key A.
Keeping warm or
• Three dotted line will appear.
cooking
• To keeping warm or cooking, select the temperature by pressing keys D or E.
• Then press key B, START for the start-up.
• The display will show actual temperature chamber.
• To see the set temperature, press one of two keys D or E.
Manual keyboard lock : while a program is on, you can lock the keyboard pushing simultaneously the main switch and Start/Stop
button, until the message "Loc" appears on the display. To disable the keyboard lock, push again simultaneously the main switch
and Start/Stop button, until you see the message "UnL" on the display.
RECOMMENDATIONS DURING OPERATION
•
The appliance should always be pre-heated before introducing the product
•
Open the door during operation as little as possible
•
Open or close the round vents, placed on the front side of the unit, to adjust moisture inside the
cavity. Closed vent: moisture will remain inside the cavity. Open vent: moisture will go out. Adjust the
vent according to the kind of food inside the cavity.
AUTODIAGNOSTIC AND FAULTS
ERRORS CAUSE
ER1 Malfunction of temperature probe of the cooking chamber. Contact the Technical Service of Assistance
ER2 Malfunction of heating elements temperature probe. Contact the Technical Service of Assistance
DESCRIPTION OF CONTROLS
A. ON/OFF switch
B. START/STOP key
C. Display
D. Temperature increase key
E. Temperature decrease key
Upper drawer
Lower drawer
23
GB
Ed. 0722