Zephyr PRW24F01BG Guide D'utilisation, D'entretien Et D'installation page 15

Installation Instructions
INSTALLING THE ANTI-TIP BRACKET:
Position anti-tip bracket at a minimum of 8" from the left or right of the side of the
1.
cooler.
Install anti-tip bracket to floor by using supplied 2" screws.
2.
Push the cooler back into anti-tip bracket making sure the bracket overlaps the
3.
cooler bottom.
Installing the Handle
1. Push aside the door gasket on the side you
wish to install the handle. Under the gasket
you will see two designated holes for handle
installation and pre-installed screws.
2. Install the handle tightly as shown with two
screws, lock washers and flat washers pre-
installed.
15