Livall EVO21 Manuel D'instructions page 4

IV. Operation Instructions
Turn On Your Helmet
button located at the back of the helmet,
once the tail lights illuminate the smart
helmet is on.
Note: If it cannot be activated successfully,
please charge it and try again.
Battery Status
Remaining battery level is shown by the number of light beads in the middle of the tail, that is displayed when a
helmet is initially turned on. Full battery is indicated when all of the light beads are on.
Connect the Remote Control BR80 (Control the Turning Signals)
1) First connection
Within 30cm
Turn on the BR80. Within the
distance of 30cm between the
BR80 and the helmet
3
Hold the button
It will automatically connect to the helmet.
After connected successfully, the tail light of