Planika COMET BURNER Notice De Montage page 18

ERROR 1 Fuel spill
Temperature too high (overheating or sensor
ERROR 2/3/4
failure). Ambient temperature too low.
ERROR 5
Shock sensor activated
ERROR 6
Incorrect fuel sensor read-out
ERROR 10 Heater temperature too low
ERROR 17
Start sequence time exceeded
ERROR 20
Fireplace rail temperature too low when starting
ERROR 21 Fireplace rail temperature too low during fire
ERROR 31
Main tank overfilled
ERROR 32
Pumping time too long in the intermediate tank
ERROR 41
Expansion tank overfilled
ERROR 99
Communication fault in the control panel
To pair the device with the mobile app go to
Click on (DIRECT WIFI) to connect directly to the burner's WI-FI. Set a SSID and password for connection, once you
submit confirmation will be displayed by the icon
Turn on the Wi-Fi on your mobile device and find the one you set before on the list. Connect to it using the password
you set. Switch on the Planika FLA4 app, the message (FINDING DEVICE) will appear on the screen. The application
will automatically search for the fireplace.
Burner's control panel screen
Device Lock button in Menu
SSID and Password
Click on (HOME WIFI) to connect with available Home Wi-Fi networks. Choose the network from the list and input the
password. Confirmation would be displayed by the Wi-Fi icon
Wi-Fi Setup configuration button
Set the password
WIRELESS CONTROL CONFIGURATION
in the right corner.
Wifi connection methods
Confirmation icon
Burner's control panel screen
Choose the network
Confirmation icon
Disconnect the device from power supply for at least 24 hours.
Ensure that the unit has been installed in accordance with the installation
instructions.
-
Make sure recommended fuel is used.
Disconnect the device from power supply for 10 minutes.
Make sure the igniter is glowing red and the device is installed in
accordance with the installation manual.
Ensure that the appliance has been installed in accordance with the
installation instructions.
Ensure that the appliance has been installed in accordance with the
installation instructions.
Ensure that the fuel pump is used in accordance with the instruction
manual. Ensure recommended fuel is being used.
Make sure recommended fuel is used.
Ensure that the recommended fuel is used.
Disconnect the device from the power supply for 10 minutes.
and then choose
Mobile device screen
Wi-Fi from mobile device list
on the right corner.
Mobile device screen
18
.
Finding the device
Finding the device