Publicité
Les langues disponibles
Les langues disponibles
Speaker setting (Available when you have HDMI cable connected to HDMI OUT jack)
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround. To make the
most of its feature, set up your speakers appropriately by referring to the following table.
How to navigate through "HDMI Multi(LPCM)":
1) Use [K / L] to select your desired menu item then
press [OK].
2) Use [K / L] to select your setting items.
• Press [RETURN] to go back to the previous screen.
3) Use [s / B] to select desired options. (Except for
"Test Tone", "Default" and setting options in
"Speaker Size" setting.)
For setting options in "Speaker Size" setting:
Press [OK] to select desired options.
For "Test Tone":
Use [s / B] to select "Off", "Manual" or "Auto",
then press [OK].
• The test tone will be output. If you select "Manual",
use [K / L] to select desired speaker, then use
[s / B] to adjust the volume. If you select "Auto",
use [s / B] to adjust the volume of the speaker that
outputs the test tone.
• If you want to stop the test tone, press [RETURN].
For "Default":
Press [OK] to reset to the default.
4) Press [SETUP] to exit.
<Speaker setting for the audio signal output from HDMI OUT jack>
Quick A HDMI Audio Out A HDMI Multi(LPCM)
Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM)
Menu
Speaker Size
Selects the desired
speaker to set. Then
change the setting by
referring to the
descriptions.
38
FUNCTION SETUP
Setting items
Front
Large*
Small
Center
Large*
Small
Subwoofer
On
Surround
Large*
Small
Surround Back
Large*
Small
Default
Front speaker (left)
Surround
speaker (left)
Surround
back speaker
(left)
e.g.) basic layout with 7.1-channel surround system
Options
Large:
For the large speakers with strong low
frequency reproduction capabilities.
Small:
For the small speakers which do not provide
strong bass sound.
You cannot change the setting of
"Subwoofer".
Speakers which are not supported by the
connected device will be displayed in gray.
Select "Default", then press [OK] to reset
"Speaker Size" setting to the default.
Front speaker (right)
Center speaker
Subwoofer
Surround
speaker (right)
Surround
back speaker
(right)
Descriptions
EN
Publicité
