PowerSmith Work Lights PTLK56-100 Manuel D'utilisation page 3

KNOWING YOUR WORK LIGHT
Daisy-Chain
Power Outlet
LEDs
CAUTION:
•
Keep the metal parts of light away from any live power source.
•
Prior to installation and maintenance of the light, disconnect the light from the power source
to prevent electric shock.
•
Installing and operating the light in harsh environments may shorten the lifespan and/or
damage the light.
•
Keep the light away from any corrosive substance and only clean with dry cloth and non-
abrasive cleaner.
•
To ensure personal safety, make sure the light is mounted firmly and securely when installed
in a high place.
MOUNTING THE LIGHT
WARNING:
sign of physical damage to the product when unpacking. Do
not use damaged product.
Hanging the Light
Use a metal cable or hook (not included) to hang the light. See FIG 2.
Make sure the installation location and hanging cable are strong enough to bear a
minimum 66 lb of weight.
Mounting to a Work Light Stand
The light can be mounted to the PowerSmith PATLK52-HS work light stand as shown
in FIG 3.
The work light stand is not included and is sold separately.
English
OPERATION
Check and make sure there is no
3
Spring-Loaded Metal Hook
On/Off Switch
10ft. Power Cable
Stainless Steel Cage
FIG 1
FIG 2
FIG 3