3.
A. Remove the screws and take the handles down.
B. Cap the screw caps on the door handle holes again.
GB
4. Install the handles into the door handle holes of the other
side in accordance with the handle installation instructions.
46
Reverse door
This refrigerator can be opened either from the left or right side.
The default way of opening the door is from the right side. If
you want to open the door from the left side, please follow the
instructions below.
Tools Required: Phillips style screwdriver / Flat blated
• If you want to have the door swing reversed, we recommend
to do so.
• Ensure the unit is unplugged and empty.
• Adjust the two levelling feet to their highest position.
•
You should rest the unit on something solid so that it will not
slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the
door.
• The refrigerator inclination angle should be less than 45°.
• Do not lay the unit fat as this may damage the coolant system.
• You should rest the Appliance on something solid e.g. a chair
just below the top panel.
• We recommend that 2 people handle the unit during
assembly.
GB
. You should only try to
.
47