Philips MG7790 Mode D'emploi page 5

Precision shaver
Use the precision shaver after trimming, to shave
unwanted hairs on cheeks, chin and along the
beard with precision. Make sure to pre-trim your
beard first, with the full-size hair trimmer without
comb, to obtain the best result.
Note: Use the precision shaver to remove
remaining hairs and detailing your beard style. It is
not suitable for a full face shave.
1 Gently press the precision shaver onto the skin
and shave along contoured edges to remove
any unwanted hairs (Fig. 22).
Cleaning
Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as gasoline or acetone
to clean the product.
Never dry the trimmer teeth with a towel or tissue,
as this may damage the trimmer teeth.
After every use: cleaning under the tap
1 Turn off the appliance and disconnect from the
power outlet.
2 Remove any comb or cutting element from the
appliance.
3 Rinse the hair chamber under a warm tap.
4 Clean the cutting element and comb under a
warm tap.
5 Carefully shake off excess water and let all
parts air dry completely.
Thorough cleaning
1 Turn off the appliance and disconnect from the
power outlet.
2 Wipe the handle of the appliance with a dry
cloth.
3 Remove any comb or cutting element from the
appliance.
4 Remove any hairs that have accumulated in the
hair chamber with the cleaning brush supplied.
5 Remove any hairs that have accumulated in the
cutting elements and/or combs with the
cleaning brush supplied.
6 Clean the cutting elements under a warm tap.
7 Clean the combs under a warm tap.
8 Carefully shake off excess water and let all
parts air dry completely.
Cleaning the nose trimmer
Clean the nose trimmer immediately after use and
when a lot of hair or dirt has accumulated on the
nose trimmer head.
1 Rinse the nose trimmer head with hot water
(Fig. 24).
2 Turn on the appliance and rinse the nose
trimmer head once more to remove any
remaining hairs. Then turn off the appliance
again.
For a thorough clean, immerse the nose trimmer
head in a bowl with warm water for a few minutes
and then turn on the appliance to remove
stubborn hair/debris.
3 Carefully shake off excess water and let all
parts air dry completely.
Cleaning the precision shaver
1 Hold the precision shaver at the grooves on
each side and pull the top part off the bottom
part (Fig. 25).
2 Blow and/or shake out any hair that has
accumulated inside the precision shaver (Fig.
26).
3 Clean the top part of the precision shaver under
a warm tap (Fig. 27).
4 Carefully shake off excess water and let all
parts air dry completely.
5 Reattach the top part onto the bottom part of
the precision shaver.
Storage
- Store the appliance in the pouch supplied.
Note: Make sure the appliance is dry before you
store it in the pouch.
Ordering accessories
To buy accessories or spare parts, visit
www.shop.philips.com/service or go to your
Philips dealer. You can also contact the Philips
Consumer Care Center in your country (see the
international warranty leaflet for contact details).
Disposal
- This product contains a rechargeable lithium-
ion battery which must be disposed of properly.
- Contact your local town or city officials for
battery disposal information. You can also call
1-888-224-9764 or visit www.call2recycle.ca
for battery drop-off locations.
- For assistance, visit our website
www.philips.com/support or call
1-844-531-6861 toll free.
- Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused. For
recycling information, please contact your local
waste management facilities or visit
www.recycle.philips.com.
Warranty and support
If you need information or support, please
www.philips.com/support or call toll free:
1-866-800-9311. To locate the nearest Philips
warranty depot, visit our website
www.philips.com.
Guarantee restrictions
- Philips Consumer Lifestyle warrants its products
for a period of two years after the date of
purchase. If any defect due to faulty materials
and workmanship occurs within this two-year
warranty period, Philips Consumer Lifestyle will
repair or replace the product at its expense.