Publicité
Les langues disponibles
Les langues disponibles
CONTROLS LOCATION
Input
TERMINAL
When connecting the speakers, it is very important to observe the
correct polarity.
This means that the wire attached to the (+), red, or positive terminal
on one component must be attached to the (+), red, or positive
terminal on the corresponding component's speaker output terminals.
Similarly, the(- ), black, negative, or ground terminal must be
connected to the respective(-), black, negative, or ground terminals.
This is easy to do by locating the color, stripes, or ribbing that appears
on most wire.
LINE OUT
SPEAKER OUT 8
1. Insert the Speak on to input Jack
2. Make a right turn to lock the connection
08
Output
PLUG
WIRE
AMPLIFIER
Input
Output
QUICK START GUIDE
Power
Flip the switch UP to turn ON the
speaker.
Flip the switch DOWN to turn
OFF the speaker.
Connect the POWER INPUT port
to an external power source using
the included power cord.
Bluetooth Pairing
Place your mobile device within 1
meter/3.3 ft of the speaker.
Make sure Bluetooth is enabled
on your mobile device.
Press the MODE button to set
the speaker to Bluetooth mode.
Select " Bluetooth" on your
mobile device to pair with the
speaker.
10 meters/33 ft max connection range after paired. Moving devices
outside this range may cause disruption or signal loss.
Press
Bluetooth
09
Publicité
