Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS
● Do not overload the box to avoid damage to the speakers.
● Do not place an open fire (candles etc) on top or next to the box -
FIRE HAZARD.
● Connect to an earthed mains outlet of 120V/240V 60~50Hz.
● If the box is used outdoors, you need to make sure that no
humidity can enter the box.
● When not in use, unplug the unit from the mains.
● Unplug the unit from the mains prior to checking or replacing the
fuse.
● Make sure that the box is placed on a stable, strong surface.
● The boxes can be hung. Use only strong and approved mounting
material. During the mounting, make sure that nobody is standing
below the mounting area.
● Do not place liquids on the box and protect it against humidity.
Humidity can shorten the life time considerably.
● Only use suitable means of transportation if you want to move the
box -BEWARE OF YOUR BACK !!
● Always unplug the unit during a thunderstorm or when it is not in
use.
● If the unit has not been used for a long period of time, condensation
can occur inside the housing. Please let the unit reach room
temperature prior to use.
● Never try to repair the unit yourself. It does not contain any user
serviceable parts.
● Run the mains lead in such a way that nobody can fall over it and
nothing can be put in it
● Set the unit to the lowest volume prior to switching it on.
● Keep the unit out of the reach of children.
04
SPECIFICATIONS
PA Speaker
System
Active 2-way full range
Woofer
15"
Tweeter
1"
RMS Power
300W
Peak Power
3000W
Impedance
8 ohm
Frequency Range
50Hz-18KHz
Sensitivity
94dB(+/-2dB)
Connector
XLR/6.35mm/RCA
Mic Input Level
<10 mV
Mic Input Level
250mV
Voltage
120/240v AC 60/50Hz
PA Speaker
Passive 2-way full range
15"
1"
300W
3000W
8 ohm
50Hz-18KHz
94dB(+/-2dB)
05
Publicité
