Miiego MOOVE 45i PRO Guide De Démarrage Rapide page 3

Charging Your MIIEGO Headphones
When the Red light is on, the headphones are charging.
When the Red light is off, the headphones are fully charged.
Full charging time is around 2-3 hours.
Next time charging
When you hear a warning tone of "battery low" every 180 seconds and the Red light
blinks, the battery status is low and needs charging.
Turning Your MIIEGO Headphones On and Off
ON: Press the M-Button for 3 seconds until the indicator light turns Blue.
OFF: Press the M-Button until the indicator light turns Red for 2 seconds.
Battery status with voice prompt when headphones are turned on
Battery high: 71-100%
Battery medium: 30-70%
Battery low: 0-29%
How to activate the ANC - Active Noise Cancelling function
Press Button 7 to activate Noise Cancelling On and Off
When ANC is ON the green indicator light is ON.
How to activate the Low Latency function
Double-press Button 7 to activate Low Latency On and Off.
When Low Latency is activated, you will hear a tone.
Soft reset
Make sure you delete "MOOVE 45i PRO" from your phones BT-device settings before
resetting.
1. When power is off, press and hold the M-button for 5 seconds until the light flashes
blue and red.
2. Press and hold both +/- buttons simultaneously for 10 seconds until you see the red
light flashing 3 times. The headphones will then power OFF automatically.
Multi-point connection (pair 2 devices):
1. Connect your FIRST device as normal. Then, turn off Bluetooth in settings on that
device. The headphones will then automatically enter pairing mode again.
2. Connect your SECOND device as normal to the headphones.
3. Then activate your FIRST device again and turn on Bluetooth. Re-connect/pair the
headphones to that device again.
Activate Siri on iOS-device:
Access Siri by pressing the M-button 2 times.
Only listen to music in a moderate volume and
in moderate periods of time. Excessive exposure
to high sound levels can lead to noise-induced
hearing loss.
This device contains a lithium accumulator.
Improper use can cause overheating and fire.
For California Residents: WARNING: This product contains
chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm.
2
ENG