Samsung UE43KU6400 Mode D'emploi page 4

Using the TV Controller
You can turn on the TV with the TV controller button at the bottom of the TV, and then use the Control Menu. The Control
Menu appears when the button is pressed while the TV is On. For more information about its usage, refer to the figure below.
Connecting to a Network
Connecting the TV to a network gives you access to online services, such as Smart Hub, as well as software updates.
Network Connection - Wireless
Connect the TV to the Internet using a standard router or modem.
The LAN Port on the Wall
Network Connection - Wired
TV Rear Panel
KU6400_XC_BN68-07867B-02_L04.indb
Wireless IP Router or Modem with
a DHCP Server
LAN Cable (Not Supplied)
Connect your TV to your network using a LAN cable.
- The TV does not support the network speeds less than or equal to 10 Mbps.
- Use Cat7 (*STP Type) cable for the connection.
* Shielded Twist Pair
4
Control Menu
: Power off
: Channel Up
: Channel Down
TV controller / Remote control sensor
Press: Move
Press & Hold: Select
The TV controller is placed at the bottom of the TV.
English - 4
: Volume Up
: Volume Down
: Source
2016-04-29 9:56:46