UFESA CF2000 Mode D'emploi page 18

tically once it has reached the selected temperature. If the temperature of the room drops the
product will turn back on, thus keeping the temperature selected by the thermostat.
Repair: • Only specialized personnel should perform repairs to this electrical appliance. Any in-
correctly performed repair can lead to considerable hazards for the user. In the event of repair,
please always contact our aftersales service. Failure to observe these instructions will lead to
the total loss of the product warranty.
TROUBLESHOOTING GUIDE
Possible operating anomalies
INCIDENT
The device
does not
work.
Information requirements for electric local space heaters
CF2000
Item
Heat output
Nominal heat
output
Minimum heat
output
(indicative)
Maximum
continuous
heat output
Auxiliary
electricity
consumption
At nominal heat
output
At minimum heat
output
In standby mode
18
CAUSE
Appliance not switched on.
The unit is on but the selected
temperature level in the thermostat is
lower than the temperature of the room.
Symbol Value
P nom 1.8-2.0
P min 0,9
P max,c 2.0
el max 0.000
el min 0.000
el SB 0.000
Unit Item
Type of heat input, for electric
storage local space heaters only
Manual heat charge control,
KW
with integrated thermostat
Manual heat charge control
KW with room and/or outdoor
temperature feedback
Electronic heat charge control
KW with room and/or outdoor
temperature feedback
Fan assisted heat output
Type of heat output/room
KW
temperature control (select one)
Single stage heat output and
KW
no room temperature control
Two or more manual stages,
KW
no room temperature control
SOLUTION
Switch on the appliance
using the speed button.
Increase the temperature
level of the thermostat
(D)
Unit
No
No
No
No
No
No