Télécharger Imprimer la page

HAEGER HotelDryer HD-120.006A Mode D'emploi page 4

Publicité

Les langues disponibles

Les langues disponibles

English
If the power cord is damaged, it should be replaced by the manufacturer
or by your after-sales service shop or similar qualified personnel to
prevent possible hazards.
Do not use parts or accessories that have not been supplied or
recommended by manufacturer.
Before plugging the appliance into the mains, check that the specified
voltage matches your home voltage.
Always unplug the appliance after use and before installing or removing
parts or performing any maintenance and cleaning tasks. Also unplug it
in the event of a power cut. The appliance must be switched off when
plugging it in or unplugging it.
Never pull on the cord or hang the appliance from it. Always unplug the
appliance by pulling on the plug, never on the cord.
Do not use the hair dryer near baths, washbasins, showers or
other water containers. If it falls into water, do NOT try to
pick it up. Unplug it immediately. Never submerge the appliance in
water or any other liquids and do not put it in the dishwasher. Do
not allow the appliance to come into contact with water during
cleaning.
Avoid splashing the appliance or the power cord.
Never leave the appliance outdoors exposed to the elements.
Do not touch the appliance with wet hands when in operation.
Never leave the appliance working on a wet surface or cloth.
When using the hairdryer in the bathroom, unplug it after use, since it is
dangerous for the appliance to be near water, even when the hair dryer
is switched off.
As additional protection we recommend the installation of a fault
current protection device (FI/RCD) with a rated current of not more than
30mA in the wiring system of the bathroom. Please contact an
authorised electrician for advice.
2

Publicité

loading