Replace The Remote Control Battery; Connections; Use The Optical Socket; Use The Aux Socket - Akai TB340-47 Manuel D'utilisation

Replace the Remote Control Battery

1 Pull out the battery tray and remove the
old battery.
2 Place a new CR2025 batter y into the
battery tray with correct polarity (+/-) as
indicated.
3 Insert the battery tray back into the slot.
Precautions Concerning Batteries
When the Remote Control is not to be used for a long time (more than a month), remove the
1
battery from the Remote Control to prevent it from leaking.
If the batteries leak, wipe away the leakage inside the battery compartment and replace the
2
batteries with new ones.
Do not use any batteries other than those specified.
3
Do not heat or disassemble batteries.
4
Never throw them in fire or water.
Do not carry or store batteries with other metallic objects. Doing so could cause batteries to
5
short circuit, leak or explode.
Never recharge a battery unless it is confirmed to be a rechargeable type.
6

Connections

Use the OPTICAL Socket

Remove the protective cap of the OPTICAL socket, then connect an OPTICAL cable (not
-
supplied) to the TV's OPTICAL OUT socket and the OPTICAL socket on the unit.
Tip: If there is no sound come out of the soundbar and the indicator light flash fast. Make sure
the audio setting of your source player (e.g. DVD player, game player, TV) is setted to PCM with
optical output.

Use the AUX Socket

A. Use a RCA to RCA audio cable (supplied) to connect the TV's audio output sockets to the AUX (R/
L) socket on the unit.
23
GB
TV