Publicité
Les langues disponibles
Les langues disponibles
Operation (continued)
5
Connect your bulb to power and follow the instructions on app screen.
NOTE:
□
This Hubspace bulb requires a 2.4GHz Wi-Fi network, which most routers provide.
□
The Hubspace app will only show Wi-Fi networks compatible with this bulb.
□
If you do not see your Wi network name when you attempt to connect your device, please check
your router settings or move your product closer to your Wi-Fi router.
6
Control your lighting on the Hubspace app.
□
Dimming Control.
□
Color Changing: Select from a shade of white or full color spectrum.
□
Schedule Creating: Pre-schedule speci c times when a connected bulb will turn off or turn on.
□
Grouping Control: Turn off or turn on multiple bulbs at the same time.
7
Set up your Voice Assistant
You can connect your smart bulb to Google Home and Alexa from the Hubspace app. Or, you can sign in to
Alexa app or Google Home and connect to your Hubspace devices from there.
Troubleshooting Guide
Problem
My Hubspace device is not connecting to Wi-Fi.
My device cannot nd any Wi-Fi networks.
My device is in a location that does not have Wi-Fi.
Can I still use it with the Hubspace app?
I cannot nd the QR code.
The QR code has become damaged. How do I add
the device?
I lost my QR code. How do I add a device?
A device is on another account. How do I transfer it?
My device is of ine for long periods of time.
The device is on and I scanned the QR code, but
the app cannot connect to it.
Can I scan the same QR code to add multiple products?
Make sure your device is connected to a power source.
Your Internet connection or Wi-Fi network may be down.
Make sure you have a 2.4GHz capable Wi-Fi network
within range of the device you are trying to add.
Yes. Use the app on a phone with an Internet connection like
LTE. The phone must be within Bluetooth range of your
Hubspace device.
It is on the bulb housing. A copy of the QR code is also
included in your device's documentation.
Under the QR code are numbers. You can enter those in
manually instead of scanning the code.
Make sure the device is connected to power.
In the Hubspace app, tap +, then Add Device.
On the Scan Device screen, tap the Search button in the lower right corner.
Follow the instructions on-screen.
Scan the QR code and it will transfer to your account.
Make sure your Wi-Fi signal strength is suf cient. You may
need to move your router, use mesh Wi-Fi, or Wi-Fi extenders.
Turn off Bluetooth on your phone and turn it back on. Then,
scan the QR code. If the problem persists, turn your phone
off and on, then try again.
No. Each product has a unique QR code.
5
Please contact 1-877-592-5233 for further assistance.
Solution
WWW.HOMEDEPOT.CA/HUBSPACE
Publicité
