Otto BL9703-GS Life Pro Manuel D'instructions page 6

Cleaning and Maintenance
The auto clean feature can clean the blender and blade assembly easily,
rapidly in complete safety.
- Pour a little warm soapy water into the pitcher and turn the Switch button to
P position for a few seconds.
- Remove the pitcher from the motor unit by directly taking it upward and
rinse the pitcher and lid cover under running water.
- Wipe the outer surface of a motor unit with a damp cloth, do not use
abrasive cleansers. Never immerse the motor unit in water for cleaning.
- Dry all parts and then reinstall them
For complete cleaning, you can hold the blade assembly at the bottom of the
pitcher carefully, for it is sharp, take it out by turning coupling on the other
side clockwise emphatically (see Fig.2), then put the detachable accessories
into a dishwasher for cleaning; they are dishwasher safe components, but the
temperature setting shall not exceed 70#.
There is no user-serviceable part inside the motor mass, so you should never
disassemble it yourself if there is a problem. Contact only the authorized
service facility for examination and repair.
5