Publicité
Les langues disponibles
Les langues disponibles
To keep on working, simply restore the water level in the self--
refilling tank as described in the "Preparation for
use"
paragraph.
PUTTNG THE APPLIANCE AWAY
First ensure that the appliance has
cooled down completely. Empty the
water tank
( 14)
.
lt is not necessary to drain the boiler after ironing.
Steam line (5) and power cord (9) could be receipt into the wire
groove (12) and line box
(10).
LOCKING IRON
To Iock the iron it must be set on the rear part of
the rest mat (Fig11). NOTE: make sure to firmly
hook the iron to prevent it falling accidentally.
CARE OF YOUR STEAM IRONING
Before attempting any maintenance
operation,
always disconnect
the appliance from the mains. To clean the body of the
appliance,
simply use a moist cloth. Do not use solvents or detergents which
may harm the body
material.
Always keep the surface the ironing plate perfectly
clean.
To
clean
it,
jus! wipe the cold surface with a damp cloth. The
appliance must not be cleaned with descaling agents.
Do not iron over zippers, hooks, rings, etc; as these may scratch the
plate.
When you have finished
ironing.
Place the iron correctly on its
stand. Ensure that there are no traces of water under the
plate,
as
these may cause stains.
Store the appliance in a dry place
Publicité
