DeLorme inReach SE Guide De Démarrage page 6

Step Three: Check your connection.
The inReach SE needs a clear satellite signal from the sky to com-
plete the setup process. Go outside and stand in an open area away
from tall buildings and trees.
When you set up your service account, DeLorme sent you a welcome
message for testing your inReach. During the activation process,
your inReach will ask you if you're ready to receive this message.
When you have a clear satellite signal, press enter. To read your
welcome message, select Messages from the device's home page
and choose the new message from DeLorme.
Time
Sending
Messages Waiting
Time: Displays the current inReach time. Go to Settings and Time to change your time zone.
Sending: The sending indicator appears when the inReach SE is sending or receiving messages
or track points; it lets you know that your device is active.
Messages Waiting: The number next to the envelope tells you how many messages are wait-
ing to be read on the Messages page.
Bluetooth: The Bluetooth indicator appears when Bluetooth is turned on, and is highlighted
when a mobile device is connected.
7
Charging: The lightning bolt lets you know that you are connected to external power and
charging. The percentage tells you how full your battery is. When the device reaches 100%,
the lightning bolt is replaced with a plug indicator to let you know the device is running from
external power.
Tracking: The check mark appears when the device is actively tracking and sending location
updates to the Exlore website.
Send a test reply to DeLorme. You are allowed five free test mes-
sages per month.
1. Select Messages from the main menu.
2. Select the welcome message from DeLorme.
3. Select Type Reply.
4. Type a message using the on-screen keyboard, and
Charging/
then press Send.
Percent Charged
DeLorme will send you an automatic reply when your message is
Bluetooth
received.
Tracking